Hornady 2840 7mm/.284 Caliber (0.284" Diameter) Bullets ELD-X, 162 Grains, Polymer Tip Boat Tail (BT), Per 100

Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.

Features:

- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Match accurate hunting bullet
- Devastating terminal performance at all ranges

Specifications:

- Caliber: 7mm/.284 Caliber (0.284" Diameter)
- Bullet Weight: 162 Grains
- Bullet Style: Polymer Tip Boat Tail (BT)
- Lead Free: No
- Cannelure: No
- Bullet Coating: Non-Coated
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.613
- Sectional Density: 0.287

Note: These are component bullets, not loaded ammunition