Loading  Loading... Please wait...

  Shop By Brand

Satisfaction Guaranteed

  Our Newsletter
Stay up to date with what's hot and be the first to get access to special sales and deals.

FedEx

UPS

USPS

Bantam E-STATION BC8DX with program kit - ECHBC8DX

Bantam
Price:
$319.95


Manufacturer:
Model:

ECHBC8DX

Condition:
New
Rating:
Rating ( )

Shipping Cost:
Free Shipping

Bookmark and Share


Product Description

 

User's manual (281KB)

Note: Balancing adapters for various type of connectors are not included and must be purchased separately. See below for the approriate adapters type for your brand of batteries.

 

Specification

Operating input voltage

DC 11~18 V

Idling current

approx. 100mA

Charge/discharge power

max. 160/25W per output

NiCd/MH

1~22 cells per output

LiIo/LiPo/LiFe

1~8 series per output

Pb

2~ 28V per output

Charge current

0.1 to 9.0A

Discharge current

0.1 to 5.0A

No. of cycles

up to 10 times, N/A for Lixx

Battery data memories

up to 5 data per battery-type

Battery capacity range

100 ~ 65000mAh

Delta-peak sensitivity

zero, 5 ~ 20mV adjustable

Trickle charge current

off, 50 ~ 300mA adjustable

Current drain in balancer

200mA/cell

Weight

1100g

Dimension

200 x 150 x 55 mm

 

User's setting-up parameters

Lithium battery type

LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

Lithium battery charge mode

Normal, Balance, Storage, Fast

NiCd/NiMH charge mode

Normal, Linear, Reflex

NiCd Delta-peak voltage sensitivity

disable, delicate, 5 to 20mV adjustable

NiMH Delta-peak voltage sensitivity

disable, delicate, 5 to 20mV adjustable

Pb battery charge mode

Linear, Pulse

Battery temperature cut-off

Off, 20 to 80C

Waste time between charge/discharge cycle

zero to 60 minutes.

Trickle charge mode

Off, 50 ~ 300mA adjustable

Integral timer limit for safety

Off, 10 to 1380 minutes

Maximum charging capacity limit for safety

50 ~ 120%

Key beep and buzzer sound

ON/OFF, melody selectable

Input power low alert

10 to 11V

LCD back-light brightness

Off, 1 ~ 8

- Operating software

The operating program in this charger is executed with mutual links and communications with every components to prevent any possible error, so it introduces the maximum safety. Especially, the charging algorithm is so multifarious that you can select the best program to suit your requirement. And BC8DX has a large LCD for showing various informations including charge/discharge graphs during the process.

- High-power dual output circuit

BC8DX employs the circuit that features two totally independent but identical high-power outputs which are powered as much as 160watts each. As a result, it can charge or discharge up to 44 cells of NiCd/NiMH or 16 series of Lithium batteries simultaneously. Furthermore, the twin-fan cooling system is so efficient that can hold such a power without any trouble of running the circuit.

- Dual Individual voltage balancer for Lithium batteries

BC8DX has individual cell voltage balancers at both outputs. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

- Balance individual cells on discharge

BC8DX also can monitor and balance individual cells of the Lithium battery pack during the discharge process as well as ‘FAST' and ‘STORAGE' mode. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

- Accept various types of Lithium battery

BC8DX can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

- Maximum safety

Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)

Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.

Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

Temperature limit : The temperature of the battery on charging or discharging will be raised by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has been reached.

Processing time limit : You can also restrain the maximum processing time to prevent any possible defect.

- Cyclic charging/discharging

Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing at both outputs.

- PC based analysis using USB communication

For technical expert, BC8DX offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack. This program can run on both outputs with single USB link to PC.


Adaptors for single battery pack:
EAC133: PolyQuest
EAC134: Align
EAC138: Kokam/Graupner
EAC139: Outrage XP/FlightPower/ThunderPower


Adapters for balancing multiple battery packs:
EAC153: PolyQuest
EAC154: Align
EAC158: Kokam/Graupner
EAC159: Outrage XP/FlightPower/ThunderPower





*The image and details above are a representation only, production variances may exist. For details please contact us or the manufacturer prior to ordering.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

 Why Buy From Us?
 -Rock Bottom Prices
 -Discounted Shipping
 -Great Customer Service
 -No Handling Fees
 -After Hours Support
 -Fast Shipping
 -Easy Returns
 -Satisfaction Guaranteed


ManVenture Webutation
See ManVenture Outpost Reviews at Bizrate.com StarStarStarStarStar



Add to Wish List

Click the button below to add the Bantam E-STATION BC8DX with program kit - ECHBC8DX to your wish list.

 Follow Us
ManVenture Blog
Subscribe to me on YouTube